E-Panels Explained

 AC conduit connections

 Warranty - 5 yrs.

 Listed by ETL for US & Canada

 Made in the USA

MNE250SMA-3PH Master - The MNE250SMA-

3PH Master E-Panel works with two of the

MNE250SMA-Slave E-Panels to create a three

phase system. The MNE250SMA-3PH Master

includes the three phase 60amp input/output

bypass system. This E-Panel can be used in

conjunction with a Sunny Island inverter as

part of a three phase off-grid, battery backup

or AC Coupled system. Terminals are provided

for hookup to leg two and leg three E-Panels.

This unit comes with 250A remote trip battery

disconnect breaker and inverter cables. The MNE250SMA-3PH Master E-Panel is pre-wired with AC

input and output wiring for leg one (master) inverter. (Two slaves are also required for three phase.)

The three phase master includes the three phase 60amp input/output bypass system. This E-Panel

can be used in conjunction with a Sunny Island inverter as part of a three phase off-grid, battery

backup or AC Coupled system. Terminals are provided for hookup to leg two and leg three E-Panels.

Comes with 250amp battery disconnect breaker and inverter cables. This unit is pre-wired with AC

input and output wiring for leg one (master) inverter. (Two slaves are also required for three phase.)

This E-Panel does not come with a relay board, RS485 (485USPD-NR) boards or MNSPD surge

protection device. RS485 boards are required when AC Coupling to SunnyBoy inverters if three stage

charging is desired. One RS485 board goes into the master inverter and each SunnyBoy Inverter. AC

Coupling to a SunnyBoy or any other grid-tie inverter is possible without RS485 boards. The Sunny

Island inverter will frequency shift based on battery voltage to knock the grid-tie inverter off line.

SunnyBoy inverters can switch between off-grid and grid-tie mode automatically when RS485 boards

are used. To program this feature you must use either SMA service cable (USBPBS) or SMA web box

(SUNNYWEBBOXU).

MNE250SMA-SLAVE - The MNE250SMA-SLAVE is a companion E-

Panel for dual, triple and quad Sunny Island inverter systems. The

Slave E-Panel is the same part number for all multiple SMA E-Panel

systems regardless of off-grid, AC coupled, battery backup, three

phase or quad.

 Separate 60amp, 120/240vac AC input and output

breakers for the slave inverter

 250amp remote trip battery breaker with inverter cables

 500amp/50mV shunt (MNSHUNT)

 Battery negative busbar

 AC input and Output busbars

 Neutral and ground busbars

 AC input and output wiring

 Comes with Red busbars installed

 Additional black and blue insulators included for tailoring to suit the application

MNE250SMA-3PH Master

MNE250SMA-SLAVE