E-Panels Explained

The backed up critical loads panel always has 120/240vac available. 60amps is available on leg 1

and 30amps on leg 2 in the critical loads panel. Comes standard with one MNSPD-300 (surge

protection device).

MNE250SMA-OG-SINGLE - The Off Grid Single is designed for a single Sunny Island off grid system. It

includes the 60amp, 120vac Manual input/output bypass system along with separate 60amp,

120vac AC input and output breakers. Comes with a 250amp battery disconnect breaker and

inverter cables. Pre-wired with AC input and output wiring. NOTE: A back plate (MNESMA-Short BP or

MNESMA-Tall-BP)

is recommended for the proper

wiring./

MNE250SMA-OG-SINGLE

FEATURES:

 60amp, 120vac AC

output/bypass assembly

and independent 60amp

 120vac AC input and output

breakers

 500A/50mV shunt (MNSHUNT)

 Neutral and AC IN and OUT terminal busbars

 250amp remote trip battery breaker with inverter cables

 AC wiring to inverter.

 alignment of the Sunny Island.

 Warranty - 5 yrs.

 Listed by ETL for US & Canada

 Made in the USA

MNE250SMA-OG/AC DM - The Dual Master E-

Panel works with one of the MNE250SMA-Slave

E-Panels to create a 120/240 VAC AC coupled or

off -grid system. The MNE250SMA-OG/AC DM

includes the 60amp, 120/240vac input/output

bypass system. Terminals are provided for

hookup to leg 2 from the Slave E-Panel. Comes

with 250amp battery disconnect breaker and

inverter cables. Pre-wired with AC input and

output wiring for leg 1 (master) inverter. (One

slave E-Panel is required for 120/240.)

MNE250SMA-OG-SINGLE

MNE250SMA-OG/AC DM