User Manual

21 of 39
10-539-1 MN5048DIY REV -
MN5048DIY
User Manual
Indicates that the current battery
type of the unit is a lead -acid
battery
Indicates that the unit has an
alarm
Indicates that the battery is in
charging state
Indicates that the unit is in a
fault condition
Indicates that the AC/PV charging
circuit is working
Indicates that the unit is in
setup mode
Indicates that the AC output
terminal has an AC voltage output
The parameters displayed in the
middle of the screen :
1. In the non -setup mode, the
alarm or fault code is displayed.
2. In the set up mode, the
currently set parameter item code
is displayed.
Parameters display on the left side of the screen: input parameters
Indicates AC input
Indicates PV input
Indicates inverter circuit
This icon is not displayed
Display battery voltage, battery charge total current, mains charge power, AC input
voltage, AC input frequency, PV input voltage, internal heatsink temperature,
software version
Parameters display on the right side of the screen: Output parameters
Indicates output voltage, output current, output active power, output apparent
power, battery discharge current, software version; in setup mode, displays the set
parameters under the currently set parameter item code
Arrow display
① The arrow is not displayed ⑤
Indicates the charging circuit
charging the battery terminal
②
Indicates the grid is supplying power
to the load
⑥ The arrow is not displayed
③
Indicates the grid supplying power to
the charging circuit
⑦
Indicates the battery terminal
supplying power to the inverter
circuit
④
Indicates PV module supplying
power to the charging circuit
⑧
Indicates the inverter circuit
supplying power to the load