User Manual

11 of 39
10-539-1 MN5048DIY REV -
MN5048DIY
User Manual
2.13 Installation and wiring
Installation steps:
Step 1: Determine the installation position and the space for heat dissipation. Determine the installation position
of the MNS Hybrid Inverter, such as wall surface; when installing the MNS Hybrid Inverter, ensure that there is
enough air flowing through the heat sink, and space of at least 200mm/8 inches to the left and right air outlets of
the inverter are open to ensure natural convection heat dissipation. Refer to the installation diagram of the unit as
above.
Warning: Danger of explosion! Never install the MNS Hybrid Inverter and lead-acid batteries in the same
confined space! Also do not install in a confined place where battery gas may collect.