Local App Manual

23 | P a g e
Linksys WRT120N
The Linksys WRT120N has a default IP address of 192.168.1.1 The default username and password is
admin for both.
You will need to access 2 portions of the routers programming, Port Range forwarding under
Applications and Gaming and DDNS under Setup. Follow the steps below to complete setup.
You will need to set port forwarding for each Classic. Click Application & Gaming and then click Port
Range forward. Enter a name in the Application field this can be just Classic or you could use a name
for it like wind or solar this is for your reference only. Enter the port the Classic is set to in the Start and
End boxes. Enter the Static IP address of each Classic this would have been documented in the section
on Setting up the Classic for the Network. Check the box that says Enable for each Classic on the
system. Click save settings and wait for the router to tell you it updated successfully.