Local App Manual

19 | P a g e
Belkin N300
The Belkin N300 has a default IP address of 192.168.2.1 The default password is blank.
You will need to access 2 portions of the routers programming, Port forwarding under Firewall > Virtual
Servers. And DDNS under Firewall > DDNS.
Click on Virtual Servers under Firewall this will bring you to the Port Forwarding screen as seen above.
Check the Enable box and fill in a Description for this port. Enter the port number assigned to the
Classic in the 2 inbound boxes as well as the 2 private ports. Enter the IP address that you have
documented from earlier when you set the Classic. Save your changes and continue on to the DDNS
part of setup if required.