Local App Manual

12 | P a g e
Setting up the Classic to work with the Local App over the Internet
The Classic needs to be connected to the Local Network and have battery voltage applied to it to
continue. Please refer to the Classic Owner’s Manual for information on connecting the Classic to the
Local Network. The Classic will be assigned an IP address by your router when it is connected into the
router and powered.
You need to set the Classic up to use a static IP address so the router will know where to forward the
ports to. On the Classic push the Main Menu button 3 times and then scroll to the right until NET is
highlighted and press Enter. The Mode will be set for DHCP and highlighted. Use the up or down
arrows to change it to Static and press Enter. Note if you need to change the IP address for whatever
reason you can do so by scrolling to the right and changing the groups as you go being certain to press
Enter when you are done. Now you will need to document this IP address for future use. As seen in the
picture below this Classic has an IP address of 192.168.1.115
Please document your IP address here: . . .