Installation Guide

Classic owner’s manual Rev I 2193
2 |
P a g e 1 0 - 0 0 1 - 1 R E V : I
A brief explanation of all the Classic Voice menus
To start:
Press the MAIN MENU button repeatedly until ―CHARGE‖ is highlighted. This is the start of the Menu
tree.
Adjusting the volume:
From the MAIN MENU, press the right arrow key 3 times to highlight MISC, then press ENTER.
Press the right arrow key once to highlight MNGP and press ENTER.
Highlight VOLUME and press ENTER.
You can now adjust the volume as needed using the up and down arrows.
Note: Number 65 is about as loud as you can go with clarity.
AUDIO MODE selection:
From the MAIN MENU press the right arrow 3 times to highlight MISC, then press ENTER. Press the
right arrow twice to highlight AUDIO.
Important Note
After choosing what level you want to use, you must reboot the Classic for it to work
Choosing your level of Chattiness:
 Off - no voice
 Rick Mode - Arc Fault and Ground Fault warnings only
 Errors- Any errors such as "no PV voltage," "Over voltage," etc. and the warnings above.
 Warnings - All errors and warnings.
 Verbose - Menu help messages the first time the menus are accessed. Information messages such
as status, charge stage and all warnings and errors.
 Chatty Cathy - Menu help messages every time the menus are accessed, all the warnings, errors
and status info as described above, plus random hidden messages.
To hear reports at specific intervals: (only in VERBOSE or CHATTY CATHY mode)
While in the Audio menu, press ADVANCED. Select the desired time interval in minutes between the
STATUS and ERROR messages.
Quiet Time:
If you want the Voices to be quiet during a specific time frame press ADVANCED from the above menu,
then press NEXT. This is the QUIET TIME function or QT. QT OFF = Talks 24 hours a day.
QT ON = Has a WAKEUP time and a SLEEP time. When activated, the Voices will be silenced between
the times listed during a 24-hour period.