User`s manual

4
Keypad Descriptions
2) Load Syringe
Fill the syringe with desired medication. Load the syringe onto the pump. (Refer to
Figure 2.) Place the syringe into the bed. Be sure to insert the nozzle into the syringe slot. Then
press and hold the secure button on the driver to bring the driver block into such a position that
the extremity of the syringe plunger can be placed into the driver slot. Fasten the rubber
strip to secure the syringe.
3) Set Infusion Rate
a) Simplified method (without ruler)
To determine the infusion rate of the syringe without ruler:
1. Load the empty syringe on the pump as instruction (refer to previous page Load Syringe)
2. Note the reading of the pump’s cursor location.(E.g. 6mm on the pump scale)