User Guide

English - 9
003-10007-99 © Midmark Corporation 2017
Connecting the Drain Assembly (Table Top Unit)
A) Screw the hose connector into the drain valve at the rear of the unit.
B) Locate the QuickClean™ close to a drain or sink and within easy reach of a standard
grounded electrical outlet. Do not place on a circuit which could become overloaded.
C) Connect one end of the drain hose to the hose connector, and locate the other end
over a bucket or sink. Shorten hose if required.
D) Connect the power cord into a suitable outlet.
E) Ensure that the power plug and the switch are accessible.
F) Make sure the drain valve is closed.
Connecting the Power Cord
A) Plug the power cord into the main power connection
located on the back of your unit
B) Ensure your QuickClean™ ultrasonic bath is plugged
into a 115 VAC fully grounded outlet.
Drain Valve
Hose Connector
Drain Hose
Drain Valve Open
Drain Valve Closed
Main Power Connection