User Guide

English - 16
003-10007-99 © Midmark Corporation 2017
Setting Temperature Units of Measure
• Your QuickClean™ enables the user to set the units of measure displayed in either
Fahrenheit or Celsius.
• Your ultrasonic has a factory preset setting of Fahrenheit.
A) Press the Menu button and scroll to the TEMP screen as shown below.
B) Use the < UP and < Down keys to select between Fahrenheit or Celsius.
C)
When the desired setting has been selected, use the MENU key to move to the next
screen, or press the  left arrow to go back to the START screen.
D) Start a cycle to store the desired temperature setting.
Setting Frequency Leap
• Frequency LEAP technology provides more homogeneous ultrasonic cleaning activity through
-
out the whole tank.
• Using advanced software and generators, the ultrasonic uses Frequency LEAP to create a
pseudo-random leaping action between a wide frequency range, reducing standing waves and
improving the cleaning action.
• Your ultrasonic has a factory set LEAP function of ON. The ON setting means the Frequency
LEAP is automatically offered when the unit is turned on
A) Press the Menu button and scroll to the LEAP screen as shown below.
B) Use the < ON and < OFF keys to set the leap function ON or OFF.
C)
When the desired setting has been selected, use the MENU key to move to the next
screen, or press the
 left arrow to go back to the START screen.
D) Start a cycle to store the desired leap function setting.