User Guide

English - 15
003-10007-99 © Midmark Corporation 2017
Setting Power Level
• Your ultrasonic bath allows the user to adjust the power level of the ultrasonic activity.
This allows the cleaning cycle to be accurately tailored to the specific cleaning
application.
• Your ultrasonic is factory set with a power level of 100%
A) Press the Menu button and scroll to the Power screen as shown below.
B) Use the < UP and < DOWN keys to adjust the power level between 70 and 100%.
C)
When the desired power level has been selected, use the MENU key to move to the
next screen, or press the  left arrow to go back to the START screen.
D) Start a cycle to store the desired power level.
Setting Degas Function
• Your ultrasonic bath allows the user to set the degas function to ON. Turning the
degas function ON will run a degas cycle every time the cycle start key is pressed.
• Your ultrasonic is factory set with the degas function turned OFF. The OFF setting
means the degas function is automatically offered when the power switch is turned
on, when you change the solution, or when the liquid has fallen below the liquid level
sensor.
A) Press the Menu button and scroll to the Degas screen as shown below.
B) Use the < ON and < OFF keys to set the degas function ON or OFF.
C)
When the desired setting has been selected, use the MENU key to move to the next
screen, or press the  left arrow to go back to the START screen.
D) Start a cycle to store the desired degas function setting.