User Guide

English - 14
003-10007-99 © Midmark Corporation 2017
A) To access the options menu and scroll through the various changeable parameters,
press the MENU key, when the main screen below is displayed.
B) To scroll through the menu, press the MENU key. To exit the MENU at any time, press
the  left arrow key.
C) When you exit the Settings Options,
DO NOT SWITCH THE MACHINE OFF
; you must
start a cycle for the new settings to be saved. Once saved, the new settings will be used
each time the machine is switched on.
Adjusting Cycle Time
• Your ultrasonic enables the user to set the cycle time from 1 minute up to 99 Minutes.
• Your ultrasonic has a factory preset cycle time of 10 minutes.
A) Press the Menu button and the TIME screen below will appear
B) Use the < UP and < DOWN keys to increase or decrease the desired cycle time.
C) When the desired cycle time has been selected, use the MENU key to move to the next
screen, or press the  left arrow to go back to the “Start” screen.
D) Start a cycle to store the desired cycle time.
Setting Options
• A number of the QuickClean™ cleaning parameters can be altered.
(Cycle Time, Power Level, Degas, Leap, Temp Unit)
• Your QuickClean™ remembers the set parameters from the previous cycle.