User Guide

English - 10
003-10007-99 © Midmark Corporation 2017
Operation
Before Operating the QuickClean™
A) Pour water into the bath so that it reaches the liquid level sensor, but do not exceed the
maximum fill level. Follow cleaning agent’s recommendations on water temperature.
Cleaning efficacy can only be guaranteed if the water temperature is at least 70 F.
B) Add the required dose of cleaning agent. Follow cleaning agent and instrument
manufacturers’ recommendations for acceptable cleaners and concentrations. To
accommodate for tank size round up the amount of cleaning agent to the nearest
1 oz/gal, 10 ml/l or 10 gram/l.
C) Turn on the machine via the switch at the rear of the unit, just above the power cord.
The switch will then illuminate.
D) Run a Degas Cycle.
ON/OFF Switch (Push Button)
Bath Fill Line
Water Level Sensor
Equipment Alert
When turning on the QuickClean™ power and the liquid level is too low, the follow
ing screen will display. The unit will not allow you to run a cycle until properly filled.
Max Fill Level