Specifications

6
B
A
FIGURE 1
INSTALLATION
Unpacking
To avoid damaging the chair’s upholstery, do not use a knife or other sharp object to
open the packaging. Unbolt the chair from the wooden shipping skid by removing four
bolts on the underside of the base, one at each corner. After unbolting, remove the
chair's upholstery, release from the skid, lifting only at points “A” and “B” in Fig. 1.
Fragile. Handle with care.
Type B, Applied Part.
Protective earth ground
Duty cycle: motor run
time - 15 seconds ON, 5
minutes OFF
Keep dry
Indicates minimum and
maximum storage temperatures
Maximum stacking height of
palleted units
Important
Information
Installation
Transportation and Storage Conditions
• Ambient Temperature Range:....................+5° C to +38° C (+41° F to +100° F)
•Relative Humidity:.......................................10% to 90% (non-condensing)
• Atmospheric Pressure:..................................500hPa to 1060hPa (0.49atm to 1.05atm)
Return To Table Of Contents