Specifications

16
EQUIPMENT ALERT
Do not hold the control pedal down after the chair has reached the maximum tilt.
Operation of the chair for an extended period of time at this position will overheat the
motor.
2. To return to the chair position from the table or trendelenburg position, retract
the footrest to its stored position. Depress the right side of the switch marked
“Return” and hold down until the chair stops automatically in the chair position.
Lithotomy Position
1. To attain the lithotomy position from the chair position, depress the left side of
the pedal marked “Acquire” (Fig. 5) and hold down until table position or tilt is
achieved.
2. Next, rock your foot to depress the right side of the pedal marked “Acquire” and
hold down until seat has reached desired position.
3. To return to the chair position from the lithotomy position, depress the left side
of the pedal marked “Return” and hold until seat has returned to the horizontal
position.
4. Next, rock your foot to depress the right side of the pedal marked “Return” and
hold down until the chair position is achieved.
Operation
Return To Table Of Contents