Specifications

Installing a New Cartridge Ribbon

1. Press the left side (A) of the

rocker switch to toggle the

printer OFF (the lamp will

turn off).

2. Four small grooves (1) are

embossed on the left and

right side of the printer

cover. With the index finger

of each hand, press down

gently on these grooves.

3. When the printer cover (1)

is tilted up to a near-vertical

position, you may lift it com-

pletely off.

4. Push down on the right side

(B) of the ribbon cartridge

(2) (marked PUSH) and

remove the old ribbon car-

tridge.

5. Install the new ribbon cartridge (2). Be sure the ribbon is inserted in front of

the paper and the ribbon is flat against the paper. Press the ribbon cartridge

(2) downward until it snaps into place.

6. Turn the knob (3) on the ribbon cartridge (marked by an arrow) clockwise to

stretch the ribbon so it is tight.

7. Replace the printer cover (1).

NOTE

If ribbon ink gets on the

printer plastic case, wipe it

off immediately. Once it

dries, it is difficult to remove.

OFF ON/FEED

EJECT

PUSH

MA439700

Return To Table Of Contents