Specifications

33
10.Insert two tabs (A) of right hand side panel (1) into two slots (B) of base (2).
11.Raise top edge of right hand side panel (1) into position under top cover (4)
and secure using two screws (3).
12.Install top inspection cover (5) on top cover (4), making sure PCB printer
harness (6) is routed into harness cutout (C) of top inspection cover.
13.Plug power cord into wall outlet.
3
4
1
2
B
A
C
6
5
4
MA43860
0
Return To Table Of Contents