Specifications

31
Installing the Printer
1. Unplug the power cord from wall outlet.
2. Remove top inspection cover (1) from top cover (2).
3. Remove two screws (3) and printer cover plate (4) from top cover (2). Store
the two screws and printer cover plate in the event that the printer is
removed and these parts are needed again.
4. Remove two screws (5) from top cover (2).
5. Pull outward and down on the top edge of the right hand side panel (6) and
remove right hand side panel from sterilizer.
WARNING
Disconnect all electrical power to the unit before removing
any of the unit’s covers/ shrouds or making any repairs to
prevent the possibility of electrical shock. Failure to comply with these
instructions could result in serious personal injury or death.
MA438400
5
2
6
2
1
3
4
Limited
Warranty
Return To Table Of Contents