Specifications

39
TP202 Rev. A © Midmark Corporation 2013
External Condensing Tank (Optional)
Using the External Condensing Tank
DuringtheVentmode,steam/heatedwaterwillbereleasedintotheexternalcondensingtank.Whenthe
water level in the tank reaches the Max.lineonthetanklabel,itmustbeemptied.
RellthetankwithwatertotheMin.linebeforeoperatingthesterilizer.
To empty the external condensing tank...
A) Remove the cap / coil assembly from the condensing tank.
B) Empty the contents of the tank into drain or bucket.
Max.
Before the next cycle...
A) Pour water into the condensing tank until it reaches the Min. line.
B) Install the cap / coil assembly onto the tank.
Equipment Alert
Do not operate the sterilizer with the external condensing tank completely empty.
The water level must remain between the Min. / Max. lines shown on the tank label.
Failure to comply may result in damage to the tank.
Min.