Specifications

25
TP202 Rev. A © Midmark Corporation 2013
Caution
When removing the cassette, hold the cassette tool so the end of the cassette
is slightly elevated and use care to prevent it from sliding off the casette tool.
To remove cassettes...
A) Hook the top, saw-toothed tab of tool to top center of cassette.
B) Rotate tool downward until the tool plate is completely under cassette.
C) Check to ensure cassette is being held securely and then remove
cassette from chamber.
Note: Cassette tool can handle cassettes up to 1 1/2” (3.8 cm) thick.
To remove M9 / M11 trays...
A) Hook the top, saw-toothed tab of tool to top center tray lip.
B) Rotate tool downward until the tool plate is completely under tray.
C) Check to ensure tray is being held securely and then remove tray from chamber.
Unloading Hot Trays / Cassettes - continued
(Using the Optional Tray / Cassette Tool)