Specifications

TP202 Rev. A © Midmark Corporation 2013

Cycle Operation - continued

Afterthecyclebuttonispressed,theparametersforthatcyclewillappearonthedisplay.

Note

On units using the metric display, °F will display as °C and PSI will display as KPA.

Pressing enables operator to change DRY time from 0 to 60 minutes in 1 minute

increments on a pre-set cycle.

Pressing decreases time. Pressing increases time.

MA596700i

WARNING

STOP button may be pressed at any time to stop or interrupt

a cycle. Goods must not be considered sterile if this occurs

before the Dry Cycle. Sterilizer will return to SELECT CYCLE mode.

Step 3: Press ‘Start’ button to initiate cycle.

You will hear a “beep” for two seconds, indicating the cycle has started.

Start

Stop