Specifications

4
INSTALLATION
Location Requirements For Sterilizer
Adherence to the following recommendations for location of the sterilizer will
contribute to optimum performance of the unit:
Support Surface (A)
- Sterilizer must be placed on a level surface to ensure that
the chamber will fill correctly. Improper water level in the chamber could cause
a sterilizer malfunction.
Support Surface Material (B)
- Place sterilizer on a Formica, stainless steel,
stone, or other water resistant material.
DANGER
Do not operate this sterilizer in areas where flammable anesthetics
are used or stored. An explosion could occur, causing fatal or seri-
ous injury.
D
A B
MA594702i
C
E
F
1" (2.54 cm)
Minimum
E*
Installation