Specifications

24
List of Authorized Accessories
Listed below are the accessories which are authorized for use with these
sterilizers. Unless noted, accessory can be used on the M9 and M11.
Accessory Name
Order Number
• Speedclean, 1 (16 oz. [.47 liter] ) bottle 002-0396-00
• Speedclean, 1 case (12-16 oz. [.47 liter] bottles) 002-0396-01
• Printer Refill Kit 002-0371-00
• Rack / Cassette (Horizontal) 9A215001 (M11/M11D Only)
• Rack / Cassette (Vertical) 9A215002 (M11/M11D Only)
• Tray / Deep (2 1/2" [6.4 cm ]) 9A224001 (M9/M9D Only)
• Tray / Deep (2 1/2" [6.4 cm ]) 9A225001 (M11/M11D Only)
• Rack / Pouch 9A226001
• Printer 9A259001
• Cassette Tray (Large) 9A306001 (M11/M11D Only)
• Tray / Cassette Tool 9A307001
• External Condensing Tank 9A260001
MAINTENANCE
User is responsible to establish a periodic maintenance procedure to assure
correct operation of equipment and reliable sterilization of loads.
Contact your local Midmark distributor or service representative to develop a
program for planned maintenance.
Tray Rack & Plate
1. Removal
• After removing trays, pry upward (A) on
end of tray plate with a screwdriver while
pulling tray rack and plate assembly out (B)
of chamber.
NOTE
After the Sterilizer is plugged into a power source at 7, 14, and 21 days a message
will be displayed informing the Operator that maintenance is due.
At the 28th day a message will be displayed . Refer to the appro-
priate maintenance instructions in this manual.
If power is interrupted the timer will reset initiating a new cycle of messages.
WARNING
Make sure that unit is cool before attempting to remove or
install tray rack and plate. Use care to prevent injury when handling
metal tray rack. Do not run Sterilizer without Tray Rack in place.
PERFORM WEEKLY
MAINTENANCE
PERFORM MONTHLY
MAINTENANCE
MA601500i
B
A
Maintenance
Operation