Specifications

11
OPERATION
Sterilizer Preparation Before Operation
1. Plug in sterilizer power cord.
Follow instructions.
Display shows:
(*will display Model Number, M9, M9D, M11, or M11D)
DANGER
Do not use this sterilizer in an explosive or oxygen-rich atmosphere,
or where flammable anesthetics are stored. An explosion or fire
could occur, causing fatal or serious injury.
WARNING
Do not run the Sterilizer without the Tray Plate in place.
If the sterilizer malfunctions, immediately unplug sterilizer, and
call for service; do not attempt to repair the sterilizer yourself. Doing so
could result in serious injury.
EQUIPMENT ALERT
For optimal sterilizer performance, allow the sterilizer to reach room tem-
perature before operating.
Also, Do not use toweling or packaging which may contain chlorine bleach
residue. Doing so could result in trays and/or chamber rusting or discoloring.
In extreme cases, the life of the chamber may be significantly shortened.
WARNING
Check the serial number label (1) on back panel of sterilizer to verify volt-
age rating for the unit. Failure to connect sterilizer to an appropriate pow-
er supply could result in damage to the unit, and electrical shock to personnel.
INITIALIZING
SYSTEM
TOTAL CYCLES XXXX
M9*, vX.XX
SELECT CYCLE
Operation