Specifications

10
3 POUCHES button a program cycle designed to process instru-
ments in combination paper / plastic steriliza-
tion pouches or wrapped instruments at 270°F
(132°C ) for 5 minutes with a 30 minute dry-
ing cycle.
4 PACKS but-
ton
a program cycle designed to process packs of
instruments at 250°F (121°C) for 30 minutes
with a 30 minute drying cycle.
5 HANDPIECES but-
ton
a program cycle for dental handpieces,which
runs at 270°F (132°C) for 6:00 minutes with a
30 minute drying cycle
6START button initiates selected program or, when SELECT
CYCLE is displayed, pressing START will acti-
vate heater for 10 minutes.
7STOP button terminates selected program or function.
81 or 2 buttons Programmable cycle buttons that allows an
operator to create two different programmed
cycles for special applications. Sterilization
time and temperature, along with Drying time
and Venting procedure can be adjusted or
changed.
9P button Programming mode button that allows opera-
tor to change temperature, time, and/or venting
procedure(s).Used in conjunction with buttons
1 or 2. (Refer to Programming Mode).
10
+ button
Allows temperature or time to be increased or
changes Vent to Fast mode when in location 1
or 2 and the P (programming) mode is acti-
vated.
11
- button
Allows temperature or time to be decreased or
changes Vent to Slow mode when in location 1
or 2 and the P (programming) mode is acti-
vated.
12 Door Handle for latching / opening door.
13 Water Level Indicator / Res-
ervoir Drain Tube
shows amount of water in reservoir.
Tube also used for drainage of reservoir into
suitable container.
14 Fill opening access for filling reservoir with distilled water.
15 Pressure Relief Valve Test
Lever
allows operator to check pressure relief valve .
16 Printer (Optional) The printer (optional equipment) can be used
to provide a permanent record of time, temper-
ature, and pressure during a cycle.
Ref. Control Function
Controls &
Indicators
NOTE
All material run in these cycles
must be validated for steriliza-
tion by the user.