Service manual

IQmark Digital Spirometer Operation Manual
56
Measurements – Lists flow or percentage measurements selected for the right axis.
Predicted – Lists predicted values for flow or percentage measurements for the right axis.
Selecting Parameters to Trend
This dialog box enables you to select which parameters to trend. There are six possible
sets of parameters. They are:
1. Volume measurements
2. Volume predicted values
3. Percentage measurements
4. Percentage predicted values
5. Flow measurements
6. Flow predicted values
Spirometry Trend Parameter Selection
From the Trending tab in Spirometry Settings, click the Select button. The Spirometry
Trend Parameters box displays. To add an item to the Selected box, select the item in
the Available box and click the Add button. This will place the new item at the bottom
of the list.
To insert an item between or above items in the Selected box, select the item in the
Selected box above which want to place a new item, select an item from the Available
box, and click the Insert button.
To remove an item from the Selected box, select the item to be removed and click the
Remove button.
To start a new list with no items selected, click the Clear List button.
Report Selection
On the Trending Tab, select which type of Flow Volume Loops you want to print when
the trend report is printed.
Next
Back
Go To Table Of Contents