Service manual

IQmark Digital Spirometer Operation Manual
22
Placing a check mark in the Primary Care Practitioner (PCP) Mode box with another
profile selected (not PCP Mode) will enable test grading, remove VC and MVV from the
test screen but will not limit the measurement parameters displayed. This allows you to
customize the report if desired. To remain in the PCP Mode without customization,
simply select the PCP Mode from the Configuration Profile box.
Measurements Tab
This tab enables you to customize which measurements you want to appear on the cover
page, the test screen and the review screen. You must select at least one measurement.
If you have selected the Tables and Graphs setting for your Cover Page, the cover
page report displays only the first 9 measurements selected. If Table Only is selected, the
cover page displays up to 28 measurements.
Spirometry Settings – Measurement Tab
You can place the measurements in any order you wish by using the Add, Insert, and
Remove buttons. Highlight the measurement with your mouse and then choose the
desired function.
 Choose the Add button to place the newly selected Available Measurements
at the bottom of the Selected Measurements list.
 Choose the Insert button to place the newly selected Available
Measurements above the currently highlighted item in the Selected
Measurements list.
Next
Back
Go To Table Of Contents