Service manual

IQmark Digital Spirometer Operation Manual

Updating from older Brentwood Diagnostic Workstation versions

If you are updating from a version of Brentwood Diagnostic Workstation earlier than

version 4.0 and have ECG or Holter records that you would like to retain and transfer to

the new version, you must first archive those records. Then you must uninstall the old

Diagnostic Workstation version, install this new version and restore the archived records.

Refer to the Diagnostic Workstation Operation Manual for instructions on updating.

Installing the IQmark Digital Spirometer (and Diagnostic Workstation)

Close all Windows programs before running this software installation. Once the

installation program is initiated, it should not be interrupted until completed. The

approximate installation time is five minutes.

1. Insert the Midmark Diagnostics Group software CD into the CD-ROM drive.

2. Follow the instructions on the screen.

Refer to the Diagnostic Workstation Operation Manual if you have any questions. The

installation CD will install both Workstation and Spirometry software.

You can access the online IQmark Digital Spirometer Operation Manual from the

Windows Task Bar through the following sequence:

 Start  Programs  Midmark Diagnostics  IQmark Spirometry Manual

3. The installation program adds at least three shortcuts to your Windows desktop: one

for the IQmark Workstation; one for the IQmark Configuration; one for the

Spirometry Calibration. You can use the IQmark Configuration or the

Spirometry Calibration program to set the communications port that the Spirometer

uses or to set up your network database. If you installed the Adobe Reader, this icon

is also added to your Windows desktop.

 NOTES:

 The IQmark Digital Spirometer application uses the IQmark Diagnostic

Workstation to manage patient records. When you install or upgrade the

Spirometer, the IQmark Diagnostic Workstation is automatically installed or

upgraded accordingly.

 You may also access other Midmark Diagnostics Group PC-based products, such

as the Holter or ECG, from the IQmark Diagnostic Workstation, if the product

is installed on the same computer. Call Midmark Diagnostics Group for the latest

information on additional PC-based diagnostic products.

 The IQmark Diagnostic Workstation is called the Diagnostic Workstation or

Workstation for the remainder of this manual.

Back

Go To Table Of Contents