Specifications

IQmark Digital ECG Operation Manual
28
To modify diagnostic statements, either edit the statements directly in the text box, or
click Add (enter new diagnostic statements) or Clear/Add (clear all statements and add
new ones from a pre-established list); clicking either will open the Add a Statement
dialog box:
In the top box, begin typing the abbreviation of a statement and the statement itself
(e.g., RBBB - Right bundle branch block) or select a statement from the list by clicking
the down arrow; the statement appears in the box below, where it can be edited.
 NOTE: If the statement list is empty, no default ECG statement list is selected in List
Management. Refer to Section II-E Configuring the IQmark Digital ECG for
how to load the default statements through List Management.
If Disable Quick Edit is checked on the Default Interpretation and Acquisition
Display Settings dialog box, the cursor is placed in the lower edit box by
default for free text entry.
You can also edit the diagnostic statements through the Details screen.
The measurements displayed in the text box on the right can be changed by double-
clicking the label of the item to be changed and entering the new value into the pop-up
dialog box that appears.
 NOTE: If Disable Interpretation is checked on the Default Interpretation and
Acquisition Display Settings dialog box, no interpretive statement appears in
the ECG Report Review screen and the top center box is blank. The top right
box, however, still displays the measurements.
 NOTE: If a stat ECG was run, STAT ECG is displayed in the ECG window above Lead I.
ECG Report (Details) Review
Click Details to display a detailed measurement screen like the one shown below:
Go To Table Of Contents