Specifications

IQmark Digital ECG Operation Manual

Live ECG

When the patient is prepared, calm and comfortable, initiate ECG data acquisition by

clicking New Test on the menu bar on the Patient Data screen. The New Test dialog box

appears, on which you can select the test type to run. Click the ECG icon in the left-hand

portion of the dialog box.

Enter the names of the technician conducting the test and the requesting physician.

Enter the diagnostic reason for performing the ECG in the Indication field. This

information is optional.

If you have configured the List Management for your practice, you can select these

entries from the lists.

Click OK to open the live ECG screen.

 NOTE: The green LED on the ECG module will light when the module is on.

Serial-type ECG module with a power switch: If the module is not on,

manually turn it on by pressing .

USB-type ECG module: IQmark Workstation turns it on as needed

 NOTE: The laptop computer’s AC adapter may introduce electrical interference. For

best ECG result, do not use the AC adapter while running a live ECG.

Go To Table Of Contents