Specifications

IQmark Digital ECG Operation Manual
18
Click the Configuration tab of the ECG Settings dialog box to access the ECG
Configuration settings.
Most of the settings on this screen are controlled by the IQmark Configuration Settings
and therefore cannot be changed, except the line frequency and COM port auto
detection for ECG module. You can make changes to these settings on either screen.
Click OK on the ECG Settings dialog box if you want to save any changes you made. This
will return you to the IQmark Configuration Settings dialog box. Please refer to the
appropriate operation manuals for details on Holter, Spirometry and Stress settings.
Once you are satisfied that the configuration settings are set appropriately, click OK on
the IQmark Configuration Settings dialog box to store the settings. These settings will
become effective the next time IQmark Diagnostic Workstation is started. If you decide
not to make changes to the configuration, click Cancel. You can also click Default to
restore the IQmark configuration settings (except Institution Name, Address and List
Management) to their default values.
Go To Table Of Contents