Specifications

IQmark Digital ECG Operation Manual
16
Click the Printer Format Settings tab of the ECG Settings dialog box to select the default
ECG report format, as shown below:
ECG Report Printer Format Settings
Item
Settings
Comments
Printer Format
Settings
6 x 2 format
12-lead with 3-lead
rhythm format (3x4+3)
12-lead format (12x1)
12-lead plus single
rhythm format (3x4+1)
2-Page Format
Default setting is 12-lead plus single rhythm format.
2-Page Format prints leads I, II, III, aVR, aVL, and aVF
on the first page and V1-V6 on the second page. You
can select the print scale of 25 mm/sec or 50 mm/sec
when printing in 2-page format. Other formats will
always print at 25mm/sec scale.
Rhythm Lead
Select any lead
Default setting is II.
Applies to 12-lead with single rhythm format.
Rhythm Lead
Group
I, II, III
aVR, aVL, aVF
V1, V2, V3
V4, V5, V6
Default setting is I, II, III.
Applies to 12-lead with 3-lead rhythm format above.
Print After
Analysis
On/Off
Default setting is Off (cleared).
When On, the resting ECG report is automatically
printed following analysis.
NOTE: For speed, set to Off and print manually.
Print
Measurements
On/Off
Default setting is Off (cleared).
When On, the detailed measurement matrix report is
printed automatically with the ECG report.
Grid
On/Off
Black, Red or Green
Default setting is On (checked).
When on, the grid is printed in the selected color if a
color printer is used.
Go To Table Of Contents