Specifications

IQmark Digital ECG Operation Manual
11
Database Settings
IQmark Diagnostic Workstation uses the local database by default. If using a network
database, you can set the default to be either the local or network by clicking Database
Settings on the IQmark Configuration screen.
Select a network database as the default by checking the Enable Network Database box
then clicking Network. Refer to the IQmark Diagnostic Workstation Operation Manual
for more details.
IQmark Diagnostic Workstation allows you to archive the ECG reports from the database
as individual files. It also allows you to send the ECG reports using your default email
program. The default format for this report is Compressed Archive Report (*.car). The
SCP-ECG (*.scp) format is more popular in the European countries.
If you have purchased a Midmark Holter product, you also have the choice to select a
different location to store your Holter ECG files.
List Management
List Management enables you to add or customize medications, history statements, race
categories, ECG/Holter indications and ECG diagnostic statements. You can also enter
the doctors and technicians using IQmark Diagnostic Workstation. Once these lists are
entered, you can later select them from the appropriate lists in the test without having
to retype them.
Click List Management in the Configuration screen and choose to configure the lists for
your local database or network database. If the network database is not setup, the
Network Database selection will be disabled as shown below.
Go To Table Of Contents