Specifications

IQmark Digital ECG Operation Manual
9
E. Configuring the IQmark Digital ECG
Through the IQmark Configuration program, you can customize IQmark Diagnostic
Workstation and the IQmark Digital ECG for your operation. If you are using the
database on your local and network computers, the configuration program also enables
you to set your default database.
The configuration program can be accessed from the desktop by double-clicking the
IQmark Configuration icon:
The IQmark Configuration Settings dialog box appears:
Complete the Institution Name and Institution Address boxes with information about
your medical practice. The IQmark Digital ECG will display your institution name on each
of the procedure screens and on printed reports. Enter a name that describes your
practice or operation to enable other medical personnel to identify your reports.
You may choose between Metric and English units of measurement, and between the
AC power source frequencies of 50 Hz or 60 Hz. The IQmark Digital ECG uses the latter
information to filter out background noise introduced by the power source through its
AC filter. In the United States, this frequency is 60 Hz. If you are using this product
outside of the United States, please consult with the local power utility company to
determine the appropriate frequency.
Go To Table Of Contents