Specifications

IQmark Digital ECG Operation Manual

II. System Installation

 NOTE: Please call Midmark Support Services before installing and seting up your

IQmark Digital ECG. Computers today are more complex than ever, coming

with wide variations of software and hardware options, making your

computer almost unique. Midmark wants to make sure that your ECG device

is installed and configured as quickly and easily as possible. Please call 1-800-

624-8950, ext. 2, and Support Services will make sure your system is up and

running in no time.

A. Computer Requirements

The IQmark Digital ECG system employs 32-bit Windows-based medical software. In

order to install and successfully use the ECG system, your computer must meet the

following minimum requirements:

Microsoft Windows-based PC with Windows 2000, XP or Vista

Hard disk with a capacity of at least 1 GB of free space

CD-ROM drive

Intel Pentium IV or compatible microprocessor with 2.0 GHz or faster CPU speed

VGA display accommodating 1024x768 or higher resolution with 16-bit color; for

ease of use, a touch-screen flat-panel 17” or larger display is recommended.

Minimum 1GB of RAM

Microsoft Windows-compatible mouse

Microsoft Windows-compatible keyboard

One high-speed serial port (115 KB per second) or an USB port

B. Hardware Setup

1. Remove the IQmark Digital ECG from its packaging and verify that you have the

following items:

IQmark Digital ECG data acquisition module

Operation manuals CD

Patient cable (10-lead)

10 universal clips

Package of electrodes

Four (4) AA alkaline batteries (for serial-type ECG module)

USB to serial port adapter (for serial-type ECG module)

 NOTE: Please call your Midmark rep or Support Services to order an IQmark

Diagnostic Workstation Installation CD, if needed.

Go To Table Of Contents