User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
98
To replace the fuses:
1) Turn the monitor “OFF” and disconnect the power cord from the back of the monitor.
2) Press down on the locking tab, which holds the fuse holder in the power input receptacle.
3) While holding down on the tab, pull the fuse holder out.
4) Remove the fuses.
5) Place new fuses directly into the fuse holder.
6) Insert the fuse holder into the power input receptacle. There should be an audible “click”
when it is secure.
STORAGE
WARNING:
If it becomes necessary to store the monitor for longer than six (6) months, remove the monitor’s
battery pack and place the monitor in its original packing container if available.
WARNING:
Use of unapproved batteries will invalidate the product’s warranty and may result in serious
safety consequences for the patient and user.
NOTE:
Batteries not charged and left in storage for more than six months could degrade and not
recharge to full capacity.
See Section 13, SPECIFICATIONS, for storage temperature information.
Next
Back
Go To Table Of Contents