User`s manual

CARDELL

Veterinary Monitors

21-02-0285 REV. 06 07/11

INSTALLING PAPER

NOTE:

A red line appears when the remaining supply of thermal paper becomes low.

1) Switch the printer “OFF”.

2) Press the Cover Open button to access the paper compartment. Remove any remaining

paper before installing the new roll.

3) Place the new paper roll as shown on the illustration and pull out enough paper to reach

out over the control panel of the printer.

4) Close the paper door.

Figure 13: Paper Installation

NOTE:

Make sure that the paper is correctly placed. If it is tilted in one or another direction and does

not come out straight from under the cover, open the door and reposition the roll again.

WARNING:

Do not touch the print head or paper cutter while replacing the printer paper.

Back

Go To Table Of Contents