User`s manual

CARDELL

Veterinary Monitors

21-02-0285 REV. 06 07/11

8. EXTERNAL PRINTER (optional)

The following section is provided as an overview of the Citizen CMP-10 Mobile Printer as it is

used with the CARDELL Monitor.

NOTE:

The Citizen Model CMP-10 Mobile Printer that is used with the CARDELL Monitor has

proprietary software installed in it for communications.

NOTE:

For more detailed information on the Citizen Model CMP-10 Mobile Printer, refer to the User’s

Manual that was supplied with the printer.

WARNING:

The CARDELL Monitor has been tested with the Citizen CMP-10 Mobile printer to comply with

IEC 60601-1-1 and is the only printer that is recommended to be used with the monitor. If

another printer is to be used, the user must read the Warning on Page 29 under LEAKAGE

CURRENT TEST and follow the guidance given.

PRINTER OVERVIEW

The Citizen CMP-10 Mobile Printer interfaces to the CARDELL Monitor via an infrared IrDA port

or by using the direct connect RS232 cable (supplied with printer). The IrDA ports are located

on the top of the printer and on the bottom front panel of the CARDELL Monitor.

When using the IrDA port, it is important to keep the two devices close together (less than three

(3) feet/one (1) one meter) and in-line to maintain proper communications.

NOTE:

The CARDELL Monitor must be equipped with the RS232 Communication Module (optional).

CAUTION:

For safe and proper usage of the external printer, please observe the following:

When using the printer:

 Avoid placing monitor in areas where fluid may enter the printer opening accidentally.

 Do not drop or bump the monitor.

 Avoid places subject to high or low temperature extremes.

 Avoid direct sunlight.

 Avoid dusty places and where corrosive gasses are generated.

 Never attempt to dismantle or repair the printer mechanism.

When handling the thermal paper:

 Store in a dark, cool and dry place.

 Do not place near organic solvents.

 Avoid contact with vinyl chloride films erasers or adhesive tapes for extended periods.

 Avoid exposure to high temperature, humidity, liquid, or sunlight.

 Always use specified thermal paper (CAS P/N 28-02-0077).

Back

Go To Table Of Contents