User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
71
SETTING THE TIME
The CARDELL Monitor’s Time value is set for Eastern Time and is set at the factory. Should it
need to be changed, enter the Monitor Configuration menu and use one of the NEXT
programmed pushbutton keys until the Message Window displays the monitor’s time using the
following format: “HH:MM”. Where HH = Hour of the Day (0 – 23) and MM = Minute of the Hour
(0 – 59). The flashing parameter indicated the parameter that can be changed.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection. Press one of the
NEXT programmed pushbutton keys to advance to the next parameter to set within the Time
menu.
NOTE:
Altering the Date and Time will affect the History readings, but not erase them.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
DAYLIGHT SAVING TIME OPTION
The CARDELL Monitor can be configured to automatically respond to time changes associated
with Daylight Saving Time. The monitor can be configured to one of five Daylight Saving Time
Option settings. They are:
 DST OFF Daylight Saving Time is “OFF”. The user is responsible for changing the
time if needed. This is the default setting for the monitor.
 DST N AM Daylight Saving Time “North America”. Use this setting and the monitor
will automatically change time accordingly to the Daylight Saving Time for
countries in North America.
 DST EU 1 Daylight Saving Time for all European countries using Greenwich Mean
Time.
DST EU 2 Daylight Saving Time for all European countries 1 hour ahead of
Greenwich Mean Time.
DST EU 3 Daylight Saving Time for all European countries 2 hours ahead of
Greenwich Mean Time.
NOTE:
Enabling Daylight Saving Time will affect the History readings, but not erase them.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
Next
Back
Go To Table Of Contents