User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
68
SOFTWARE REVISIONS
The CARDELL Monitor displays the current software revision of its operating system and that of
the internal modules being used inside. The software versions are displayed in the following
order:
Table 6: Software Revisions
Software Module Message Window
CARDELL Monitor Control Board Ver X.X
Boot Loader Boot X.XX
Power Supply PIC Processor PIC X.X
CAS NIBP Module ND X.X
Nellcor SpO
2
Module
(1)
NEL X.X
Use the ARROW UP or ARROW DOWN pushbuttons to view the messages.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
SETTING THE LANGUAGE
The CARDELL Monitor can operate in one (1) of ten (10) languages: English, German, French,
Italian, Spanish, Dutch, Swedish, Portuguese, Norwegian or Danish.
To configure the monitor’s operating language, first enter the Monitor Configuration menu. Once
in the menu, use one of the NEXT programmed pushbutton keys until the Message Window
displays the current language being used.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
AUDIO ALARMS (SILENCE/RESET Pushbutton)
The CARDELL Monitor’s SILENCE/RESET pushbutton can be configured to have the audio
associated with patient alarms set to one of three selections. The selections are:
 2-Minute Audio Alarm Off (Default)
 Permanent Audio Alarm Off
 Alarm Limit Off
(1) In the Model 9401 monitor, this message is skipped.
Next
Back
Go To Table Of Contents