User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
66
When enabled, the monitor will not alarm for patient related High and Low alarms, NIBP
Application Error and SpO
2
Probe Alarm. The monitor will alarm for Low Battery and Dead
Battery.
To re-activate the audio alarm, press the SILENCE/RESET pushbutton again. The visual
indicators will go out. Refer to Page 68, AUDIO ALARMS (SILENCE/RESET Pushbutton) for
more information.
ALARM LIMITS OFF
If the Alarm Limits Off mode is selected in the Monitor Configuration menu, all alarms associated
with patient alarms are “OFF” except for Low Battery and Dead Battery. The visual indicator
next to the SILENCE/RESET pushbutton will flash at a rate of two (2) second “ON” and two (2)
seconds “OFF” and the message “Alrm Off” will be displayed in the Message Window as a
reminder.
NOTE:
If the Message Window is currently displaying a time stamp from a previously taken NIBP
measurement, the “Alrm Off” message will alternately be displayed with the time stamp
message.
To re-activate the audio alarms, refer to Page 68, AUDIO ALARMS (SILENCE/RESET
Pushbutton) for more information.
Next
Back
Go To Table Of Contents