User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
58
EVENT HISTORY (EVENT-Ev)
To review History based on Event readings, press the HISTORY pushbutton. The most current
NIBP measurement and the time of measurement (HH:MM-Ev) are displayed on the front panel
along with its corresponding %SpO
2
values. If there are no readings in the History, the message
"No Evnts" is displayed in the Message Window.
Press the ARROW DOWN pushbutton to review preceding measurements. The word "Oldest"
will be displayed briefly on the Message Window when there are no more readings left in the
memory. The oldest measurement will then be redisplayed.
Press the ARROW UP pushbutton to advance the measurements towards the most current
measurement taken. The word "Newest" will be displayed briefly on the Message Window when
there are no more current readings. The most recent measurement will then be redisplayed.
To exit the History Mode and return to "Ready" press the CANCEL pushbutton. If a
measurement is desired immediately while in the History Mode, simply press START. This will
exit the History Mode and begin a measurement.
TREND HISTORY (TREND-Tr)
NOTE:
For the Model 9401, no Trend History menu will be available.
To review Trend History, press the HISTORY pushbutton twice. The most current measurement
(NIBP or a one (1) minute averaged %SpO
2
) values and the time of measurement (HH:MM-Tr)
are displayed on the front panel. If there are no readings in the History, the message "No Trend"
is displayed in the Message Window.
Press the ARROW DOWN pushbutton to review preceding measurements. The word "Oldest"
will be displayed briefly on the Message Window when there are no more readings left in the
memory. The oldest measurement will then be redisplayed.
Press the ARROW UP pushbutton to advance the measurements towards the most current
measurement taken. The word "Newest" will be displayed briefly on the Message Window when
there are no more current readings. The most recent measurement will then be redisplayed.
To exit the History Mode and return to "Ready" press the CANCEL pushbutton. If a
measurement is desired immediately while in the History Mode, simply press START. This will
exit the History Mode and begin a measurement.
NOTE:
Turning the power “OFF” does not clear the History memory. Measurements will remain in
memory for up to twenty-four (24) hours. Any measurement older than twenty-four hours is
deleted. It is suggested to manually clear History between patients (See CLEARING HISTORY
on Page 59).
Next
Back
Go To Table Of Contents