User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
51
LEFT SIDE VIEW
Figure 9: Left Side Panel View
CUFF HOSE CONNECTION
The six (6) foot, Inflation Hose is connected to the monitor where the MAXNIBP logo is located
as shown in Figure 9. The hose must be connected to the cuff prior to use.
NELLCOR® VET SpO
2
SENSOR CONNECTION
(Model 9402 only)
The SpO
2
connector is compatible only with Nellcor® VetSat® veterinary sensor. Connect the
Interface Sensor cable in this receptacle for SpO
2
monitoring.
Next
Back
Go To Table Of Contents