User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
49
VOLUME:
Used to set the volume level of the Alarms and the SpO
2
Beep
(Model 9402). Use the Up and Down Arrows to change.
Also used to adjust the brightness of the front panel displays
(press and hold for two (2) seconds).
ALARM LIMITS:
Allows the user to enter and set the monitor’s Alarm Limits.
ARROW UP:
Allows forward Adjustment (Auto Cycle, History, Inflation Pressure,
Limits and Monitor Configuration).
Press to cycle through menu selections or press and hold for
quicker advance.
ARROW DOWN:
Allows backwards Adjustment (Auto Cycle, History, Inflation
Pressure, Limits and Monitor Configuration)
Press to cycle through menu selections or press and hold for
quicker advance.
NEXT The HISTORY and VOLUME pushbutton keys (right side of the Up
and Down Arrow keys) have been programmed to allow the user to
advance forward to the next selection in the Monitor Configuration
menu.
PREVIOUS The CYCLE TIME and ALARM LIMITS pushbutton keys (left side
of the Up and Down Arrow keys) have been programmed to allow
the user to advance backwards to the previous selection in the
Monitor Configuration menu.
Next
Back
Go To Table Of Contents