User`s manual

CARDELL

Veterinary Monitors

21-02-0285 REV. 06 07/11

START/STAT:

START:

Initiates a blood pressure measurement in the Manual Mode or

begins the selected automatic cycle.

STAT:

Starts a series of NIBP measurements (press and hold for two (2)

seconds). Continues for five minutes.

CANCEL:

Cancels any active blood pressure function and immediately

deflates the cuff.

Press and hold for two (2) seconds to change between Large Cuff

and Small Cuff NIBP Modes.

Also used to Cancel out of a menu and return to “Ready”.

CYCLE TIME:

Allows the user to select a time interval for Automatic blood

pressure measurement.

Automatic measurement cycles of 1, 2, 3, 4, 5, 10, 15, 30, 60, or

90 minutes may be chosen.

Also used to read the monitor’s current time (press and hold for

two (2) seconds).

HISTORY:

Allows the user to review stored patient readings. Refer to Page

57, HISTORY MODES for more information.

Back

Go To Table Of Contents