User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
47
FRONT PANEL CONTROLS
Figure 7: Front Panel Controls
ON/STANDBY:
Press once, turns “ON” the CARDELL Monitor’s display (if it was
OFF). Press again, turns the monitor’s display “OFF”.
SILENCE/RESET:
When pressed during an active patient alarm, silences the audio
portion of that alarm for fifteen (15) seconds.
When pressed during an active equipment alarm, the alarm
condition shall be acknowledged along with the audio and visual
shall be removed.
Used to enable and disable the two (2) Minute Audio Off or
Permanent Audio Off feature. Refer to Page 63, CLEARING
ALARMS for more information.
Allows the user to clear NIBP and SpO
2
messages from the front
panel display.
Next
Back
Go To Table Of Contents