User`s manual

CARDELL
®
Veterinary Monitors
21-02-0285 REV. 06 07/11
18
On each detected pulse, the perfusion LED does indicate patient perfusion signals. This bar
graph gives the user a pulse-by-pulse visual indication of waveform signal quality. An audio
“beep” can be enabled that is generated each time the SpO
2
module detects a pulse.
NOTE:
The bar graph is not proportional to the pulse volume.
PATIENT ENVIRONMENT
The CARDELL Monitor has been tested with specific parts of the “system” used within the
Patient Environment. Figure 1, defines the Patient Environment.
Figure 1: Patient Environment
The parts of the CARDELL Monitor “system” that can be used in the Patient Environment are
defined as;
Table 1: Parts of the System
The CARDELL Monitor (9401 / 9402)
Appropriate Accessories, listed in the ACCESSORIES section of this User’s Manual
Line Cord
RS232 Communications
Citizen CMP-10 Mobile Printer
RS232 Interconnect Cable (supplied with printer)
AC Adapter / Charger, Model TRC-09-1100-M from Group West or equivalent (supplied
with printer)
Next
Back
Go To Table Of Contents