Service manual

CARDELL MONITOR SERVICE MANUAL
21-02-0286 REV. 02 05/09
45
8. EXTERNAL DEVICE INTERFACING
OVERVIEW
The CARDELL Monitor is capable of interfacing to an external Serial printer.
WARNING:
The CARDELL Monitor has been tested with the Citizen CMP-10 Mobile printer to comply with
IEC 60601-1-1 and is the only printer that is recommended to be used with the monitor. If
another printer is to be used, the user must read the Warning on Page 18 under LEAKAGE
CURRENT TEST and follow the guidance given.
RS232
The CARDELL monitor uses the optional DB9 connector to interface to the Citizen CMP-10
Mobile printer using the cable supplied with the printer. The connector information provided in
this section is made available to allow the user the ability to print the monitor’s History data to an
external serial printer. Refer to Figure 6 and Table 4 for connection information.
Refer to Section 15, SPECIFICATIONS for Serial Interface information.
Back
Next
Go To Table Of Contents