Installation Guide

English - 4

High-Speed

Handpiece

Connection

Step 5: Install Prophy Angle on Low-Speed Handpiece.

A) Turn chuck release ring counter clockwise to unlock.

B) Install Prophy angle. Turn chuck release ring clockwise to

lock.

Step 6: Install Bur in High-Speed Handpiece.

Push Bur Into Handpiece

Push Button

Finish Sliding Bur Into Handpiece

This Portion of the Bur

Should be Inside the

Handpiece

Equipment Alert

Handpieces will not work properly if not installed as shown.

Shaft Inside the Handpiece

Prophy

Angle

Step 7: Install handpieces.

Shank will only

go in half-way

Lock

Unlock

High-Speed

Handpiece W/

Swivel Coupler

Connection

Lightly spray the exposed o-rings

with one step conditioner.

Tighten coupler firmly with wrench.

Note

Not all high-speed

handpieces will be

equipped with a

lampmodule.

High Speed

Low Speed

Lamp Module

Low-Speed

Handpiece

Connection

Line up components properly to prevent

damage resulting in hand piece failure.

003-1878-99